Load Cell About

ADI ARTECH load cells are high-precision force and weight measurement sensors based on strain gauge technology. They convert applied mechanical force into an electrical signal that can be accurately measured by weighing indicators, controllers, PLCs, and automation systems. ADI ARTECH manufactures a wide range of load cells including single-point, shear beam, S-beam, compression, tension, crane, hopper, tank, and customized load cells for industrial weighing and force measurement applications. Their products are designed for high accuracy, durability, temperature stability, and reliable performance in demanding industrial environments. ADI ARTECH has been manufacturing load cells and transducers since 1991 and offers more than 500 sensor variants for various industries.

Key Applications

• Platform Scales
• Tank & Hopper Weighing
• Bagging Machines
• Check Weighers
• Crane Scales
• Material Testing Machines
• Force Measurement Systems
• Process Automation
• Industrial Batching Systems
• Tension & Compression Measurement

 FAQs

1. What is a load cell?

A load cell is a transducer that converts force, weight, tension, or compression into an electrical signal for measurement and control purposes.

2. What technology is used in ADI ARTECH load cells?

ADI ARTECH load cells use strain gauge technology, providing accurate and repeatable measurements for industrial applications.

3. What types of load cells does ADI ARTECH offer?

ADI ARTECH manufactures:

• Single Point Load Cells
• Shear Beam Load Cells
• S-Beam Load Cells
• Compression Load Cells
• Tension Load Cells
• Crane Load Cells
• Ring & Pancake Load Cells
• Custom Load Cells

4. What is the accuracy of ADI ARTECH load cells?

Depending on the model, accuracy typically ranges from high industrial precision with very low non-linearity, hysteresis, and repeatability errors.

5. Are ADI ARTECH load cells suitable for outdoor use?

Yes. Many models feature moisture-proof sealing and IP-rated protection suitable for industrial and outdoor environments.

6. Can ADI ARTECH load cells measure both tension and compression?

Certain models, such as S-Beam load cells, are designed for both tension and compression measurement, while others are application-specific.

7. What output signal do ADI ARTECH load cells provide?

Most models provide a millivolt-per-volt (mV/V) output signal that can be connected to indicators, transmitters, PLCs, or data acquisition systems.

8. What industries use ADI ARTECH load cells?

Industries include manufacturing, pharmaceuticals, food processing, logistics, material handling, automotive, testing laboratories, and process automation.

9. Can ADI ARTECH provide customized load cells?

Yes. The company offers customized sensor solutions based on capacity, dimensions, mounting arrangements, environmental conditions, and application requirements.

10. How often should a load cell be calibrated?

Calibration frequency depends on usage and industry standards. Critical weighing systems are generally calibrated annually or as per quality management requirements.

11. What causes load cell failure?

Common causes include:

• Overloading
• Shock loading
• Improper installation
• Moisture ingress
• Cable damage
• Electrical surges

12. What is the typical lifespan of an ADI ARTECH load cell?

When properly installed and protected from overload and environmental damage, ADI ARTECH load cells can provide many years of reliable service.